There are many types of polishing buffs, and each one is designed to carry out a different task. There are three traditional centers, and most buffs are made with one of them. These centers allow buffs to be used with the different machines easily. The three centers include; a leather center which adds stiffness and durability, a plastic center which provides durability same as the outdated lead centers but without the dangers of lead, and a shellac center which provides a tight fit on tapered spindles and is the most economical of all.
These are soft and are mostly used with rouge for a final polish. Muslin and cotton buffs almost same and have same applications. They are available in various diameters ranging from 1 inch to 6 inches. They usually have a ply of 30 to 60. Ply describes a number of layers a buff has, and the higher ply means thicker or wider buff. They are available in different versions, some of them are:
Uncombed: they have a harder surface than the combed ones. They are ideal for rough finishing when they are made from the abrasive compound. They also remove scratches from the workpiece.
Stitched: they are used when the high polish is needed. According to the polishing buff supplier and manufacturer, stitching adds stiffness to the buff.
Loose: a loose buff is soft, and it is flexible. They are ideal for contoured edges and curves. They create less heat than a stitched buff.
Sisal is known for lasting longer than the other material hence, the buffs made of sisal are rough and tough. These buffs are extremely efficient because they work on both flat and contoured surfaces. Same as the sisal carpet supplier and manufacturer, the sisal buff manufacturers are also in great advantage. Here are some types of the sisal buffs.
Pleat Open: the bias cut and heavy stitched sisal cloth are used to manufacture this type of the buff. It is covered with cotton cloth. It is used as a heavy polishing buff.
Open Sisal Buff: high-quality bias cut sisal cloth is used in the manufacturing. It is one of the most popular buffs that are used to polish all metals.
Sisal Bias Buff: it is sewn spirally which enables it to be used for the initial-polishing die case, steel, and stainless steel.
Cord Unit Sisal Buff: this buff is manufactured from the unit of twined sisals. It is considered ideal for heavy polishing of all metals and curved surfaces.
Rope Sisal Buff: it is manufactured from plaited sisal laces. The segments are transverse to the rotation of the wheels in this buff which makes it ideal for the pre-brushing of convex surfaces.
Combination Disk Sisal Buff: it cut round and alternately piled up. It is suitable for light and heavy polishing both.
Being a polishing buff supplier and manufacturer is a profitable venture, but it requires persistency and accuracy. It is absolutely vital to select the right type of material for production as quality is the only key to sustain and thrive.